Maintenance & Service Guide
Presario 1200 Series
Model: 1245
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Removing the Battery Charger Board
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive 
Fan Assembly 
System Board 
Dip Switch
Settings
Memory
Module
To remove the battery charger board, complete the following steps:
1.Prepare the computer for disassembly.
2.Remove the palmrest cover with touch pad.
3.Remove the hard drive.
4.Remove one screw from the battery charger board, unplug the board from the connector on the system board, and lift the battery charger board out of the chassis.
To replace the battery charger board, reverse the previous procedures.
When replacing the battery charger board, ensure
NOTE: that the pins are aligned with the connector on the system board.
