Removal and replacement procedures
RTC battery
Description | Spare part number |
|
|
RTC battery |
|
|
|
Before removing the RTC battery, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the following components:
a.Hard drive (see “Hard drive” on page
b.Optical drive (see “Optical drive” on page
c.Keyboard and switch cover (see “Keyboard and switch cover” on page
d.Speaker (see “Speaker” on page
e.Display assembly (see “Display assembly” on page
f.Top cover (see “Top cover” on page
g.System board (see “System board and optical drive connector board” on page
Maintenance and Service Guide |