Removal and replacement procedures
Speaker
Description | Spare part number |
|
|
Speaker |
|
|
|
Before removing the speaker, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see “Battery” on page
5.Remove the keyboard and switch cover (see “Keyboard and switch cover” on page
Remove the speaker:
1.Disconnect the speaker cable 1 from the system board.
2.Release the speaker cable from the clips 2 built into the top cover.
3.Remove the two Phillips PM2.5×4.0 screws 3 that secure the speaker to the top cover.
4.Remove the speaker 4.
Reverse this procedure to install the speaker.
Maintenance and Service Guide |