Removal and replacement procedures
26.If it is necessary to replace the webcam module cable, release the tabs 1 built into the display enclosure shielding.
27.Remove the webcam module cable 2. The webcam module cable is included in the Display Cable Kit, spare part number
28.If it is necessary to replace the wireless antenna transceivers and cables, remove the Phillips PM2.5×4.0 screws 1 that secure the transceivers to the display enclosure.
29.Release the transceivers 2 from the display enclosure. The transceivers are attached to the enclosure with
30.Release the tabs 3 built into the display enclosure shielding.
31.Remove the wireless antenna transceivers and cables 4. The wireless antenna transceivers and cables are included in the Display Cable Kit, spare part number
Reverse this procedure to reassemble and install the display assembly.
Maintenance and Service Guide |
