Removal and replacement procedures

Remove the modem module:

1.Turn the system board upside down with the front toward you.

2.Remove the two Phillips PM2.5×4.0 screws 1 that secure the modem module to the system board.

3.Disconnect the modem module 2 from the system board.

4.Disconnect the modem module cable 3 from the modem module.

5. Remove the fingerprint reader board.

Reverse this procedure to install the modem module.

Maintenance and Service Guide

4–43

Page 86
Image 86
Compaq 615 manual Removal and replacement procedures