Removal and replacement procedures
20.If it is necessary to replace the display hinges, remove the eight Phillips PM2.0×3.0 screws 1 that secure the hinges to the display panel.
21.Remove the display hinges 2. The display hinges are available using spare part number
22.If it is necessary to replace the display panel cable, turn the display panel upside down with the bottom edge toward you.
23.Release the adhesive support strip 1 that secures the display panel cable to the display panel.
24.Disconnect the display panel cable 2 from the connector on the back of the display panel.
25.Remove the display panel cable 3. The display panel cable is included in the Display Cable Kit, spare part number
Maintenance and Service Guide |
