TECHNICAL INFORMATION BULLETIN No. 041797-2
Alamo Industrial ™ Technical Services Department
1502 East Walnut
Seguin, Texas 78155
Models: Machete, MB21 & MB24
Bulletin No:
Date:
Apr. 17, 1997
Cylinder & Linkage Pin Replacement Kits:
Boom cylinder pin replacement kits for all Machete MB21 & MB24 mowers are now available. The new design utilizes a Boss and Bolt arrangement to replace the original tear drop and bolt design. Each kit contains all the necessary parts along with a detailed instruction sheet regarding the correct replacement procedure for the pins. Likewise, if new pins are ordered in the future, the original part numbers will be automatically replaced with the new design being shipped to you. Welding and painting will be required.
If you are experiencing problems with the original pin design. Order the new kit and replace the pins with the new design. Instruction Sheet # 02971904 will be sent with each kit ordered. This instruction sheet will show detailed instructions on how to install the following kits.
If replacing these as warranty, follow all warranty procedures in accordance with warranty guide and Service Bulletins which apply to this application only.
Kit Numbers:
Kit No. | Qty Description | Kit No. | Qty | Description | ||
02967685 | 1 | Pin Kit, Dipper Cyl. Rod End | 02967691 | 2 | Pin Kit, Head Tilt Linkage | |
02967673 | 1 | Pin Kit, Swing Cyl. Barrel End | 02967694 | 1 | Pin Kit, Tilt Cyl. Rod End | |
02967677* | 1 | Pin Kit, Lift Cyl. Rod End | 02967683 | 1 | Pin Kit, Tilt Cyl. Barrel End | |
02967677* | 1 | Pin Kit, Dipper Cyl. Barrel End | 02967675 | 1 | Pin Kit, Swing Cyl. Rod End | |
02967679 | 1 | Pin Kit, Lift Cyl. Barrel End |
| Bolt & Nut |
|
|
02967681 | 1 | Pin Kit, Link Arm to Dipper |
|
|
| |
|
|
|
| |||
02967694 | 1 | Pin Kit, Link Arm to Linkage |
|
|
|
|
02966791 | 1 | Pin Kit, Linkage Asy to Hitch Post. |
|
|
| New |
02868803 | a/r | Pin Bushing |
|
|
| |
|
|
| Pin | |||
|
|
|
|
|
| |
Note: there is also a Turning Arm Upgrade Kit which |
|
|
| |||
includes a new 1 piece king pin, All Bushings and |
|
|
| Weld on Boss | ||
Turning arm (Kit # 02972211) which is not shown |
| Figure 1 |
| |||
here. |
|
|
|
| ||
Continued Next Page
MACHETE
© 2005 Alamo Group Inc. |
