Information Bulletin 092895 Continued from previous Page
WITH NUT TIGHT AND SWITCH "OFF". MEASURE THIS GAP IF ANY
MOUNT PLATE
IF GAP EXIST, INSTALL WASHERS OR
SHIMS TO EQUAL GAP MEASURED IN STEP 3
MOUNT PLATE
KNOB SHOULD LIGHTLY CONTACT
NUT WHEN PROPERLY ADJUSTED
MOUNT PLATE
TECHNICAL INFORMATION BULLETIN
No. 092895
Contact:
Alamo Industrial
Technical Services Department
1502 East Walnut
Seguin, Texas 78155
Ph;
This document does not authorize23the repair or replacement of parts under warranty
MACHETE
© 2005 Alamo Group Inc. |
