
SERVICE BULLETIN No. 990303
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
| Models: | Machete Boom mounted on JD 6000 2 & 4 WD | Bulletin No: | Date: | |||
|
|
| S/N | ||||
|
|
| 990303 |
|
| ||
|
|
| S/N |
| Mar. 3, 1999 | ||
|
|
| (Old # 990002A) | ||||
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| Parts: |
| Labor: | Old Parts Disposition: | Termination Date: | ||
| 100 % at Dealer Net | 4.8 hrs. at Dealer registered | No Returnable Parts | Jul. 31, 1999 | |||
|
|
| Shop Rate | involved |
|
|
|
|
|
|
|
|
|
|
|
Lower Cross Member Reinforcement Kit P/N 02974182:
Subject:
Support gussets have been added to the lower crossmember frame support
Service Required:
1.Secure the tractor to facilitate a safe repair, (Engine off, Park brake on, Key Secured & etc..).
2.Using the hardware provided, line up the holes in the plates with the those in the tractor frame and attach the gusset plates to each side of the tractor over the lower crossmember as shown in the drawing provided with the kit. NOTE: The gusset is made at an exaggerated length to accommodate the possibility of varying distances between the crossmember and the tractor frame. Some trimming of the gusset may be required.
3.Utilize a continuous 1/4" weld to attach the bottom of the gusset to the lower crossmember between the two crossmember bolts on each side of the tractor as illustrated in figure 1 and in the assembly drawing provided with the kit. Weld both sides of gusset.
4.Torque the four mounting bolts that attach gussets to tractor frame to 300 ft. lbs. (407 Nm)
5.Clean the welded area and paint with high gloss Black paint.
Parts Required: (order Kit #02974182)
Part No. | Qty | Description |
02974182 | 1 | Support Gusset Kit |
P/N 02974182 Kit includes | ||
Part No. | Qty | Description |
02974181 | 2 | Rail Gusset |
00000200 | 4 | Nut |
00003901 | 4 | Lockwasher |
02978600 | 4 | Bolt |
02977386 | 1 | Instruction Drawing |
Gusset
# 02974181
1/4"
1/4"
Gusset
# 02974181
Figure 1
Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates.
MACHETE
© 2005 Alamo Group Inc. |