Alamo T 7740 Blade Bolt Inspection / Recall, Models: Machete Boom, 970108, Aug. 1, Old # 970009A

SERVICE BULLETIN No. 970108

Alamo Industrial Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models: Machete Boom	Bulletin No:	Date:
MR 60" Rotary Heads S/N 01039 & Up
	970108
		Aug. 1, 1997
	(Old # 970009A)

Parts:	Labor:	Old Parts Disposition:	Termination Date:
100 % at Dealer Net	1.0 hrs. at Dealer registered	Scrap Old Parts	Aug. 31, 1997
	Shop Rate

Blade Bolt Inspection / Recall:

Subject:

The Blade Bolt Nut Retaining Roll Pin Bore may be oversized and could allow the roll pin to become loose in the bore. The loose roll pin could therfore allow the blade bolt Nut to loose torque.

Service Required:

1.Visually inspect and check the fit of the roll pin. If it is loose or has come loose replace the Blade Bolt, Blade Bolt Nut and Roll Pin on the above listed serial numbered units.

2.Torque the Blade Bolt to 600 ft. lbs. before installing the new Roll Pin.

Parts Required:

Part No.	Qty	Description
02782900	2	Blade Bolt
00020900	2	Nut
00023200	2	Roll Pin

Figure 1

Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates.

MACHETE

© 2005 Alamo Group Inc. 2-18