Alamo T 7740 Blade Carrier Retaining Bolts, Alamo Group Inc, BA60 Heads, SERVICE BULLETIN No

SERVICE BULLETIN No. 050504

Alamo Industrial Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models: A-Boom Rotary Heads, HY15, HY60, MR60 Machete			Bulletin No:		Date:
Rotary Heads , Rear Mount Rotary Heads, Versa Rotary Heads,
BA60 Heads			050504		May. 5, 2004
Parts:	Labor:	Old Parts Disposition:		Termination Date:
100 % at Dealer Net	1 hr. at Dealer registered	Hold All Parts for disposi-		Aug. 5, 2004
	Shop Rate	tion under Warranty
		Policy

Blade Carrier Retaining Bolts:

Subject: Due to the Possibility of Bolts that may not meet Alamo Industrial Standard being used in the production process all bolts that meet the Serial Number list below should be changed. This will apply to bolts that were used at factory during assembly process, This WILL NOT include Bolts that were used as replacement parts. If you have a model with the following serial numbers replace the bolts and Lockwashers. Because there are more than one length of Bolt involved it will be required to use the appropriate Parts Manual to determine the Bolt and Washer Number that applies to your model.

Service Required:

1.Remove the Four Allen Head Bolts in the center of the Blade Carrier one bolt and Lockwasher at a time. DO NOT remove all four bolts at one time and DO NOT INSTALL bilts that are longer or shorter than bolts that were removed.

2.Replace one Bolt and Lockwasher, torque it to 400 ft. lbs. then move on to the next bolt.

3.Continued this until all four bolts have been replaced.

Parts Required:

Part No.		Qty	Description
See Manual		4	Allen Head Bolt			Blade carrier		Spindle
See Manual		4	Lockwashers
A-Boom S/N 06045			to	06071
B/A	S/N	02534	to	02552
HY15	S/N	02416	to	02418
HY60	S/N	01211	to	01211
Machete	S/N	01360	to	01364	&
	S/N	02017	to	02036		Torque to 400 ft. lbs.
MR60	S/N	02035	to	02035			Blade carrier retaining
RM	S/N	02405	to	02405			Bolt & Lockwasher Qty
Versa	S/N	05175	to	05178	&	Figure 1	4 per carrier
	S/N	06336	to	06394

22

222

Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates.

MACHETE

© 2005 Alamo Group Inc. 2-29