Alamo T 7740 manual King Pin and Boom Pin Bushing Drivers Available

TECHNICAL INFORMATION BULLETIN No. 032697

Alamo Industrial ™ Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models: Machete, MB21 & MB24

Bulletin No:

032697

Date:

Mar. 26, 1997

King Pin and Boom Pin Bushing Drivers Available:

It is now possible to obtain the proper bushing driver to facilitate the installation of all bushings on the Machete Boom Assembly. The Large Driver (P/N 02972281) is used to install the King Pin Bushings in the frame, while the Small Driver (P/N 02972282) should be used to install all the bushings in the boom. These tools may be used to install bushings on several other Alamo Industrial Models such as Slope Mowera and A-Booms. The proper use of the installation tools will help to prevent damage to the bushing surfaces during installation.

# 02972281 for driving	# 02972282 for driving
2-1/2" ID Bushings	1-1/2" ID Bushings

Figure 1

Note: Replaces / Same as Bulletin No. 032697A

This document does not authorize the repair or replacement of parts under warranty

MACHETE

© 2005 Alamo Group Inc. 1-18