SERVICE BULLETIN No. 971903
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
| Models: | Machete Boom Mowers |
| Bulletin No: | Date: | ||
|
| Manufactured prior to Mar. 1997 |
| ||||
|
|
| 971903 |
|
| ||
|
|
|
|
|
| Mar. 19, 1997 | |
|
|
|
|
| (Old # 970001A) | ||
|
|
|
|
|
|
|
|
| Parts: |
| Labor: | Old Parts Disposition: | Termination Date: | ||
| 100 % at Dealer Net | 2.5 hrs. at Dealer registered | Hold any removed parts | Sep. 1, 1997 | |||
|
|
| Shop Rate | for warranty decision |
|
| |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
Turning Arm - King Pin Upgrades:
Subject:
Boom Hinge Point Pin Upgrades. These repairs are covered in detail on Technical Information Bulletins #
Service Required:
1.See Technical Information Bulletins #
2.Caution must always be used when installing new bushing and when aligning the pins. Do Not try to align the pins by hitting it with a hammer, See operators manual for correct way to align pins and install bushings. It is recommended that bushings be installed with a bushing driver, these Bushing drivers are available from Alamo Industrial (See Technical Information Bulletin
# 032697).
Parts Required:
Turning Arm - King Pin Replacement Kits:
(Qty use 1 each)
Part No. | Description | |
02972211 | 1 | Turning Arm Kit |
02967679 | 1 | Lift Cyl. Pin Kit, Barrel End |
02967675 | 1 | Swing Cyl. Pin Kit, Rod End |
02967689 | 1 | Main Pin Replacement |
Note: Instruction Sheet is included in Kit. Check with Service Bulletin 972103 (970002A) and
971903 (970001A) as these service bulletins use some of the same parts and cover some of the same upgrades, so when ordering parts for this service bulletin check so duplicate parts (kits) are not ordered.
MACHETE | Continued Next Page |
© 2005 Alamo Group Inc. |
