Alamo T 7740 C Pull Circuit, B Hold Circuit, Corrective Action, TECHNICAL INFORMATION BULLETIN No

TECHNICAL INFORMATION BULLETIN No. 010896

Alamo Industrial ™ Technical Services Department

1502 East Walnut

Seguin, Texas 78155

830-372-2708

Models: All Machete Boom Mowers

Bulletin No:

010896

Date:

Jan. 8, 1996

Trouble shooting improper operation of motor starting circuit:

The correct operation of the motor is for the operator to pull out the Main Motor Switch and then momentarily press the Motor Start Button. the Motor will advance to full operating speed and will continue to run while the Main Motor Switch is in the OUT position.

If the harness is wired wrong, the motor will start as soon as the Motor Start Switch is pulled out without pressing the Motor Start Button.

A

C

Pull

Circuit

B

Hold

Circuit

The above illustration is the female connector of the motor wire harness

Corrective Action:

Using needle nosed pliers, push the B and C connectors out of the back of the plug and reinstall them in the opposite positions, or cut the two wires to the B and C connectors and splice them back together reversing them.

This document does not authorize the repair or replacement of parts under warranty

MACHETE

© 2005 Alamo Group Inc. 1-8