SERVICE BULLETIN No. 973107
Alamo Industrial Technical Services Department
1502 East Walnut
Seguin, Texas 78155
| Models: | Machete Boom |
|
| Bulletin No: | Date: | ||
| S/N |
| ||||||
|
|
| ||||||
| S/N |
| 973107 |
| Jul. 31, 1997 | |||
|
| (Old # 970008A) | ||||||
|
|
|
|
|
|
|
| |
| Parts: |
| Labor: | Old Parts Disposition: | Termination Date: | |||
| 100 % at Dealer Net | 3.5 hrs. at Dealer registered | Retain All parts for | Nov. 15, 1997 | ||||
|
|
| Shop Rate | Warranty Return |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Upper King Pin Bushing Slipping:
Subject:
It is possible that the upper King Pin Bushing may loose retention and work down from the bore. This could result in damage to the frame, Pin and Arm.
Service Required:
1.Visually inspect the bushing location in the top king pin bore. The bushing should be flush with the bottom of the bore.
2.If the Bushing is in the proper place there will be no need to make this repair.
3.If the busing appears to have moved downward in the bore, refer to the King Pin bushing replacement section in the operators manual / Service Manual for the proper procedure to
support the boom while removing it. The turning arm and boom will need to be removed. Using Locktite Brand 271 adhesive
(Purchased Locally) Install new bushings in the upper and lower Pin holes. Use proper Drivers when installing busings.
Parts Required:
Part No. | Qty | Description |
02968804 | 2 | King Pin Bushing |
1 | Locktite Brand 271 |
Figure 1
Warranty Compensation will be provided following proper filing of warranty claim in accordance with the Alamo Industrial Warranty Policy. Claim allowance may vary in accordance with laws governing a specific region. Any Warranty associated with this service bulletin must be within authorized dates.
MACHETE
© 2005 Alamo Group Inc. |