![Manual background](/images/new-backgrounds/72690/7269069x1.webp)
Fill
9.Flush detergent solution out of the syrup system and dispensing valve as follows:
A.Place waste container under applicable dispensing valve.
B.Activate the dispensing valve for one minute to purge all detergent solution and flush out the syrup system.
C.Continue to activate the dispensing valve in cycles (“ON”for
10.Connect potable water source to the remaining syrup systems and flush detergent solution out of the syrup systems as instructed in step 9 preceding.
11.Remove potable water source from the syrup system.
STEP 3. SANITIZE SYRUP SYSTEMS
12.Using a clean syrup tank (syrup tanks system) or a
13.Syrup Tank Systems.
Connect sanitizing solution tank, pressurized at 60 to
Place all
14.Sanitize the syrup system and dispensing valve as follows:
A.Place waste container under applicable dispensing valve.
B.Activate the dispensing valve for one minute to purge all water from and install sanitizing solution in the syrup system and dispensing valve.
C.Continue to activate the dispensing valve in cycles (“ON”for
15.Repeat steps13 and 14 to flush water out of and install sanitizing solution in the remaining syrup systems and dispensing valves.
16.Remove sanitizing solution source from the syrup system.
17.Allow sanitizing solution to remain in the syrup systems for not less than 10 or no more than
STEP 4. WATER FLUSH SYRUP SYSTEMS
WARNING: Flush sanitizing solution from the syrup systems as instructed. Residual sanitizing solution left in the syrup systems could create a health hazard.
18.Fill syrup tank (syrup tank system) or a
19.Syrup Tank Systems.
Connect syrup tank containing potable water, pressurized at 60 to
312027000 | 30 |