FlavorFusion®/FlavorOverload Training Manual
VALVE SERVICE
NOTE: Before servicing the valve the BIB connector must be disconnected an the pressure must be relieved.
1.Remove the locking screw after removing the valve from its mounting block.
2. | Twist the solenoid 90o. | Spring Clip | Locking Screw |
3.Pull the solenoid loose from the valve body.
4.To remove the tubing squeeze the spring clip together and pull off.
FIGURE 19
CARBONATOR TANK
Always disconnect water and CO2 and relieve the carbonator pressure before removing the car- bonator probe.
MOTOR REMOVAL
NOTE: Apply anti seizing lubricant to the threads of mounting bolts when service is required.
Grounding Connection/ | Upper and Lower Level |
CO2 Inlet | Control Probes |
Relief
Valve
FIGURE 20
Heater, Agitation | Heater Spring |
Motor, & Gear Box |
Motor 
Mounting
Screws
FIGURE 21
© | - 9 - | Publication Number: TP01070 |
