Frequency Response THD+N, Firewire | Creative 1212M, 1820M manual

7 - Appendix

Technical Speciﬁcations

Speciﬁcations: 1820M System

TURNTABLE INPUT

Frequency Response: THD+N:

SNR:

Stereo Crosstalk: Maximum Level:

Input Capacitance: Input Impedance:

RIAA equalized phono input

+/-0.5 dB, 50 Hz - 20 kHz

-76 dB (.015%) (1 kHz, 10 mV RMS unbalanced input)

90 dB (1kHz, 10 mV RMS unbalanced input)

< -80 dB (1kHz at -1 dBFS)

Professional: 80 mV RMS

Consumer: 20 mV RMS

220pF

47K ohm

DIGITAL I/O

S/PDIF	• 2 in/2 out coaxial (transformer coupled)
	• 2 in/3 out optical (software switchable with ADAT)
	• AES/EBU or S/PDIF (switchable under software control)
ADAT	• 8 channels, 24-bit @ 44.1/48 kHz
	• 4 channels, 24-bit @ 96 kHz
	• 2 channels, 24-bit @ 192 kHz
Firewire	400 IEEE 1394a port (6-pin)
	Compatible with DV cameras or HDs
MIDI	2 MIDI in, 2 MIDI out

SYNCHRONIZATION

Internal Crystal Sync:

RMS JITTER @ 44.1K (Measured via Audio Precision 2)

SMPTE

44.1kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz ADAT, S/PDIF (optical or coaxial)

Word Clock (sync card only) - (75 ohm termination, switchable)

SRSync SourceRMS jitter in picoseconds 44.1 kHz internal Crystal 596ps

44.1 kHz Optical Input

795ps

Converts to/from longitudinal time code (LTC) to MIDI time code (MTC)

Frame Rates

Modes

Input Level:

Output Level:

Input Impedance:

24, 25, 30 drop, 30 non-drop frames/second. Compatible with 29.97 fps timecode

Regeneration, stripe and conversion modes

0.5 - 4V p-p

+4 dBu, -10 dBV (software selectable)

10K ohm

E-MU Digital Audio System

105

Image 105

Creative 1212M, 1820M owner manual Frequency Response THD+N, Firewire, Internal Crystal Sync

Contents

Digital Audio System MU Japan MU Digital Audio System Table of Contents PatchMix DSP Mixer Effects Using High Sample Rates AppendixIndex 115 Welcome IntroductionAll Systems Include MU Digital Audio System Components MU 1212M MU 1820M MU 1212M System MU 1820 SystemMU 1820M System Setting Up the Digital Audio System Installation Connector Types Safety FirstName Description Connects Installing the E-MU 1010 PCI Card To install the 1010 PCI card into your computerSlo ts Sync Daughter Card Install the Sync Daughter Card or 0202 Daughter Card MU 0202 & AudioDock MU 1010 PCI Card Rack Mounting the AudioDock Rubber FeetRubber Foot Rack-shelf Mount Installing the E-MU 1010 Drivers Software InstallationUninstalling all Audio Drivers and Applications Windows 2000 or Windows XP Installation Software Installation PCI Card & Interfaces E-MU 1010 PCI CardConnections 0202 Daughter Card IEEE1394 FirewireAnalog Inputs and Outputs Midi In/Out Inputs are conﬁgured as follows AudioDock Front Panel Connections Headphone Output & Volume ControlPreamp Section Midi 1 In/Out Midi Input Indicators AudioDock Front Panel IndicatorsClock Source and Sample Rate Indicators Sample Rate Indicators Line Level Analog Inputs Rear Panel ConnectionsTurntable Inputs & Ground Lug Line Level Analog Outputs Computer Speaker Analog Outputs EDI Connector CardMidi 2 In/Out Computer Speaker Output Duplicates Line Level Output Sync Daughter Card PatchMix DSP PatchMix DSP MixerOverview of the Mixer To Invoke the PatchMix DSP Mixer Monitor Mixer WindowOut Main MU Icon in the Windows Taskbar ToolbarRight-Click Here New Session Session System Settings Session SettingsOpen Session Save Session Midi Settings Using External Clock Settings Input too weak? Use -10 Input setting Output too weak?Headroom Outputs +4 or Inputs +4 orPCI Card Optical Input PCI Card Optical Output Input Mixer Strips To Add a New Strip Mixer Strip Creation Windows Media Player/DVD/Surround Sound Playback Multichannel Wave FilesTo Delete a Mixer Strip Multichannel Wave to Surround Sound Speaker Channels Insert Section Working with InsertsTo Add an Effect to an Insert Location To Add a Send Insert Insert MenuTo Add a Send/Return Insert Input Using External Sends & Returns To Insert an External Signal Processing DeviceOutboard Signal Processor Asio Direct Monitor Send/Return To Add an Asio Direct Monitor Send/ReturnRecordingPlayback Meter Inserts To Set the Input Levels of a Strip60 50 40 30 20 To Insert a Meter Making the Best Possible Recording Trim Pot Insert Test Tone/Signal Generator Insert To Delete an Insert Managing Your InsertsTo Bypass an Insert To Bypass All Inserts Pan Fader Aux SectionAux Bus Amount Output InputPre-Fader Aux Send Post-Fader Aux Send Level, Pan, Solo & Mute Controls Main Section Effect TV Screen & Selectors Output Input Auxiliary Effects & Returns Sync/Sample Rate IndicatorsInput Input Output Output Section PatchMix DSP Mixer Main Section Overview EffectsEffects Palette Core Effects Multi-Effects To Select an Effect FX Insert ChainsTo Edit an Effect To Delete an Effect To Create a New Preset Category Creating, Renaming & Deleting Categories or PresetsTo Delete an Effect Category or Preset To Rename an Effects Category To Export your Core FX Presets To Import Core FX PresetsTo Import FX Category Folders To Export your FX Category Folders FX Edit Screen To Select a User Preset User Preset SectionTo Create a New User Preset To Bypass ALL To Delete a User Preset Core Effects and Effects PresetsTo Rename a User Preset To Overwrite or Save a User Preset DSP Resource Usage List of Core EffectsExample Total Effects Band Para EQ Core Effects DescriptionsBand Shelf EQ Low Shelf Or… High Shelf Setting up a Parametric EQ Band EQMid Band High Shelf Low-Shelf Mid 1-Band Mid 2-Band High-Shelf Auto-Wah Filter Auto-Wah VCA Out ChorusCompressor Basic Controls Distortion DistortionInput Meter Flanger Flanger Freq Shifter Post Gain Leveling Amp Early Reflections ReverberationTime Lite Reverb Mono Delays 100, 250, 500, 750, 1500 DelayRolloff Rotary Phase Shifter Speaker Type Description Speaker Simulator Delay Stereo Delays 100, 250, 500, 750Rolloff Early Reflections Late Reverb Stereo Reverb Frequency Vocal MorpherList of Available Phonemes Phoneme B MU PowerFX To Setup & Use E-MU PowerFX Setup Cubase LE Automating E-MU PowerFX MU PowerFX Resource AvailabilityTo Record PowerFX parameter changes in Cubase LE Application Name Compatible? Render Extra Buffers MU PowerFX Compatibility Chart Using E-MU PowerFX with WaveLab and SoundForge Rendering Audio with E-MU PowerFXGeneral Tips for Rendering using PowerFX Tips for using Freeze Mode on Cubase LE MU E-Wire VST Wire VST plug-inPatchMix DSP Strip configured for E-Wire To Setup and use E-Wire Delay Compensator Delay Units Parameter Delay Compensator UseCubase VST or Cubasis PatchMix Track Grouping Tracks MU 1820 System at 88.2k/96k 1010 PCI Card & AudioDock Using High Sample RatesMU 1820 Inputs/Outputs at 88.2kHz or 96kHz Source Total Line In 2 & 3 enabled Adat enabledMU 1212M System at 88.2k or 96k 1010 PCI Card & I/O Card MU 1212M Inputs/Outputs at 88.2kHz or 96kHz Source MU 1212 System at 176.4k/192k 1010 PCI Card & I/O Card MU 1820 System at 176.4kHz or 192kHzMU 1820 Inputs/Outputs at 176.4kHz or 192kHz Source Total Outputs Microphone & Adat Input enabled Microphone & Line 3 Input enabledLine Input 1 & Adat Input enabled Line Inputs 1 & 3 enabled WDM Recording and Playback Behavior Using High Sample Rates Overview Appendix Smpte FeaturesSync Daughter Card Supplement Smpte Conversion External Mode Host ModeFlywheel Mode Smpte Modes of Operation Smpte Background Stripe ModeTime Code Types of Smpte Avoiding Smpte problems Why use SMPTE?Smpte Subframe Resolution Frames-per-second Resolution Example Smpte Connection Other Tips for using SmpteDuplicating Smpte time code Sync Midi Time Code MTC To Enable MTCWord Clock In/Out To Synchronize PatchMix DSP to an External Clock Source Digital Mixer House Sync Generator Digital DeviceAdat Optical MU 1010 Card External Device supplies Master Clock Getting in SyncPatchMix DSP supplies Master Clock Via Adat Useful Information Balanced 1/4 TRS Connectors Unbalanced 1/4AES/EBU to S/PDIF Cable Adapter Cables balanced or unbalanced? Appearance Settings in Windows Phantom PowerDigital Cables Grounding Speciﬁcations 1820M System Technical SpeciﬁcationsType Frequency Response THD + N Gain Range Max Level Type Frequency Response Stereo CrosstalkDynamic Range Microphone Preamp Gain Range Max Level Frequency Response THD+N FirewireInternal Crystal Sync Frame Rates Modes Input Level Output Level Input Impedance Speciﬁcations 1820 System MIC PREAMP/LINE Input RMS Jitter @ 44.1K Speciﬁcations 1212 System Weight 30lb / 0.14kg Dimensions 7 / 170.2mm Dimensions & WeightWeight 25lb / 0.10kg Dimensions 04 / 128mm PCI Card Internet References SynthForums Trade Name Declaration of ConformityModel No Responsible Party Compliance Information Appendix Internet References 114 Numerics Index Index Adat 118 MU Digital Audio System 119 Index 120