Creative 1212M, 1820M owner manual Input, Output, Pre-Fader Aux Send, Post-Fader Aux Send

Pre or Post Fader Aux Sends

When you create a New Mixer Strip you have the option to place both Aux Sends after the channel volume fader and mute control or you can place them before the fader and mute. Post-Fader turns down the send level as you lower the volume of the strip. With Pre-Fader selected, you may still hear the effected signal returning from one of the Aux Buses with the volume fader turned down.

With the Pre-Fader box selected, the Aux Send levels are completely unaffected by the Level Fader and Mute settings. The Pre-Fader setting allows you to create two completely different mixes using the Aux Buses since the signal levels of this mix won’t be affected by the fader settings.

Input Pre-Fader Aux Send

4 - The PatchMix DSP Mixer Mixer Strip Creation

In order to change a strip from pre-fader to post-fader or vice-versa,

Pan

Amt

Amt

Fader

Mute

Volume Fader & Mute does NOT affect Send Levels

Send	Return
Amount	Amount
	Side
Aux Bus 1	Chain
Send	Return
Amount	Amount
	Side
Aux Bus 2	Chain

you have to delete the strip and create a new one.

Main / Monitor Bus Output

Input

Pan

Fader

Mute

Post-Fader Aux Send

Volume Fader & Mute affects both Aux Send Levels

SendReturn

AmountAmount

Amt

Amt

	Side
Aux Bus 1	Chain
Send
Amount	Side
Aux Bus 2	Chain

Return

Amount

Main / Monitor Bus Output

E-MU Digital Audio System 45