2 - Installation

Install the Sync Daughter Card or 0202 Daughter Card

Rubber Feet

Four rubber feet were included with the AudioDock. These feet should be used if you’re not going to rack mount the AudioDock. If you are going to rack mount the AudioDock, leave the feet off.

To install the rubber feet, simply peel off the protective backing from the adhesive and press the feet into the round depressions at each corner of the bottom plate.

Rubber

Rubber

Foot

Foot

Rack-shelf

Rack-shelf

mount

mount

Rack-shelf

Rack-shelf

mount

mount

Rubber

Rubber

Foot

Foot

Rack Mounting the AudioDock

The AudioDock was designed to be rack mounted using standard 19-inch rack shelves. (These shelves are available from a number of sources on the Internet. Search for “Rack Shelf”.) Two AudioDocks fit side by side on a single rack shelf. Two screws are provided to secure the AudioDock to the rack shelf (M3 x 6mm). Do not use screws longer than 6mm or damage to the circuit board may result.

14

Creative Professional

Page 14
Image 14
Creative 1212M, 1820M owner manual Rack Mounting the AudioDock, Rubber Feet, Rubber Foot Rack-shelf Mount