Creative 1820M, 1212M owner manual AudioDock, Inputs are configured as follows

The AudioDock

The AudioDock connects to the E-MU 1010 PCI card via the EDI cable.

The AudioDock provides (6) balanced analog inputs, a pair of microphone preamp inputs, (8) balanced line-level analog outputs, (4) 1/8” outputs for connecting powered computer speakers, (2) MIDI inputs, (2) MIDI outputs, one optical S/PDIF output, a headphone amp, and a RIAA equalized turntable preamp section which is “normalled” into line input 3L and 3R.

The inputs are configured as follows:

(2)mono microphone/line inputs

(3)stereo pairs of line level inputs (6 inputs)

(1)RIAA equalized turntable preamp input allows you to connect a turntable without using an expensive external preamp.

Note: These inputs are automatically disconnected when plugs are inserted into inputs 3L & 3R since the A/D converters are shared between the turntable inputs.

(2)MIDI input ports

The outputs are configured as:

(4)stereo pairs of line level outputs

(1)stereo pair driving a stereo headphone jack (the provided cable allows 2 stereo outputs)

(1)optical S/PDIF output (stereo).

(4)stereo 1/8” computer speaker outputs. These outputs carry the same signals as the 4 stereo line level outputs and are provided as a convenience for connecting computer speaker systems.

(2)MIDI output ports

3 - PCI Card & Interfaces The AudioDock

fThe AudioDock is completely “hot pluggable”— It’s OK to plug or unplug the AudioDock while the computer is turned on.

It’s a good idea to mute AudioDock inputs 3 in the PatchMix DSP mixer when nothing is plugged in, since the turntable preamp has a very high gain (60dB) and could contribute extra noise to your mix/ monitor bus.

E-MU Digital Audio System 19