Creative 1212M, 1820M owner manual MU 1820 System at 176.4kHz or 192kHz, Outputs

6 - Using High Sample Rates

Overview

E-MU 1820 System at 176.4kHz or 192kHz

(1010 PCI Card & AudioDock)

At the highest sample rate you have 4 inputs and 10 output channels.

There are four possible input configurations when using the E-MU 1820 system at 176.4kHz or 192kHz. Each of the three options provides four input channels.

•Microphone Input and Line 2 Input enabled

•Microphone Input and ADAT Input enabled (2-chan ADAT)

•Line 1 Input and ADAT Input enabled (2-chan ADAT)

•Line Inputs 1 & 3 enabled (allows use of turntable inputs at 192kHz)

S/PDIF is not specified to operate at 176.4kHz/192kHz and so all S/PDIF inputs and outputs are disabled. The headphone output parallels the Monitor output and is no longer independently assignable, just like at 96kHz.

E-MU 1820 Inputs/Outputs at 176.4kHz or 192kHz

Source	Inputs		Inputs		Inputs	Inputs	Total
	Mic &		Mic		Line 1
						Line 1 & 3	Outputs
	Line 3		& ADAT		& ADAT
ADAT	0	2		2		0	2
Microphone	2	2		0		0	-
Line 1	0	0		2		2	2
Line 2	0	0		0		0	2
Line 3	2	0		0		2	0
Line 4 out (monitor)	-	-		-		-	2
S/PDIF 1	0	0		0		0	0
S/PDIF 2	0	0		0		0	0
Headphone out	-	-		-		-	2 (monitor)
Total	4	4		4		4	10

E-MU 1212 System at 176.4k/192k (1010 PCI Card & I/O Card)

At 176.4kHz or 192kHz, you have two 24-bit inputs and outputs. S/PDIF is not specified to operate at these rates and so all S/PDIF inputs and outputs are disabled. The ADAT input/output channels are reduced to two channels (S/MUX standard).

E-MU 1212M Inputs/Outputs at 176.4kHz/192kHz

Source	Inputs	Outputs
ADAT	2	2
S/PDIF 1	0	0
Line	2	2
Total	4	4

E-MU Digital Audio System 89