About WebCam Go

Figure 1-1 shows you the front view of the camera.

 

 

 

 

 

 

 

 

 

 

 

 

LED light

 

 

 

 

 

 

This indicator lights up in green when

 

 

 

WebCam Go is switched on.

 

 

 

 

 

Snapshot button

 

 

 

 

 

After you have started WebCam Go Control, you can

 

 

 

 

 

press this button to capture a still image.

 

 

 

 

 

 

 

Focus mark

 

 

 

 

 

 

 

Use this mark to focus the lens quickly: to focus on objects

 

 

 

 

 

 

 

approximately 6 inches/15 cm away, turn the ring until this

 

 

 

 

 

 

 

mark is at the 12 o’clock position; to focus on objects 10 feet/

 

 

 

 

 

 

 

3 m away or further, turn the ring until this mark is at the 9

 

 

 

 

 

 

 

o’clock position.

 

 

 

 

 

 

 

 

 

Viewfinder

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Lens

Focus ring

To adjust the focus, point the lens at your subject and then rotate this ring clockwise and/or anti-clockwise until the image is sharp (in focus.)

Figure 1-1: Front view of WebCam Go.

1-2 Installing WebCam Go