2

Using WebCam Go Control

Starting WebCam Go Control

If WebCam Go Control does not recognise the camera correctly, see Appendix A, “Troubleshooting”.

This chapter consists of the following sections:

Starting WebCam Go Control

Using WebCam Go Control

To start WebCam Go Control

Click Start ->Programs ->Creative ->Creative WebCam Go ->

Creative WebCam Go Control.

Or

Press the Snapshot button on the camera.

When you start WebCam Go Control for the first time, the Insert Disk dialog box may appear, prompting you for the Windows 98 CD-ROM. If this happens, do the following:

1.Insert the Windows 98 CD-ROM into the CD-ROM drive.

2.In the Insert Disk dialog box, browse to the Win98 folder and click the OK button.

3.Click the OK button again.

The required drivers are copied to your system.

Using WebCam Go Control 2-1