
To focus the lens more accurately
Step 2: To take pictures
•You can only switch on the camera when it is disconnected from the system.
•For description on the different modes, see Figure
•The counter value may decrease by more than one when a picture is taken if the picture has more details or colours, resulting in a bigger file size. In some cases, the counter value may not decrease even though a picture is taken.
1.Start WebCam Go Control.
2.Adjust the camera’s focus ring until the preview displayed in WebCam Go Control’s window is in focus (clear and sharp).
3.Click the button to close WebCam Go Control.
1.Unplug the USB cable from the camera.
2.Press the On button on the camera.
The camera is switched on and the remaining number of images that you can take is shown by the Image counter.
3.To change the mode of the camera, press the Mode button:
❑Single snapshot
Select this mode if you want to take single snapshots instantly.
❑Multiple snapshot
Select this mode if you want to take a series of successive snapshots. You can create an AVI file out of these snapshots.
❑Delayed single snapshot
Select this mode if you want a snapshot to be taken after a specified length of time. You can use this feature to take pictures of yourself.
❑Delayed multiple snapshot
Use this feature when you want a series of snapshots to be taken after a specified length of time. You can create an AVI file out of these snapshots.
Using WebCam Go as a Portable Camera