•When the counter value reaches “000”, you cannot take any more pictures until you have cleared the camera’s memory by deleting existing pictures.
•The camera will turn itself off automatically if it’s left idle after a specified amount of time.
4.Aim the camera at the desired object, using the camera’s viewfinder to verify that the object is in the camera’s view.
5.Hold the camera still and press the Snapshot button.
6.Continue holding the camera until the Camera busy LED (red light) goes off. The picture(s) is(are) taken and stored in the camera’s memory.
Also, the counter value is decreased by at least one.
7.To take another picture, repeat steps 4 through 6.
8.To switch off the camera, press the Off button and hold it down for 2 seconds.
Downloading Pictures from WebCam Go
After taking pictures, use the application, WebCam Go Control, to download the pictures. WebCam Go Control displays the pictures stored in the camera in thumbnail view and you can select those that you want and download them into your computer.