Installing Software

Some of the steps in the installation process may not occur in the same sequence as described here.

1.Switch on the computer.

2.When the Add New Hardware Wizard dialog box appears, click the Next button. The dialog box similar to Figure 1-5 appears.

3.Click the Search for the best driver for your device (Recommended) option and then click the Next button.

The dialog box similar to Figure 1-6 appears.

Figure 1-5: The Add New Hardware Wizard dialog box.

4.Insert the WebCam Go CD into your CD-ROM drive.

Note: If the setup program runs automatically, exit from the program.

5.Select the Specify a location check box and type D:\DRIVERS (where D: represents your CD-ROM drive) in the box provided.

Figure 1-6: Specifying a location.

1-6 Installing WebCam Go