
Figure
The viewfinder does not show if objects are in focus. To verify whether objects are in focus, use WebCam Go Control. For details, see “Taking Pictures with WebCam Go” on page
Camera busy LED indicator
When the camera is connected to the system, this indicator will blink when commands are sent from the system to the camera.
When the camera is disconnected, this indicator will blink when the camera is adjusting the picture exposure. After that, it will stay lit while the camera saves the image to memory. Then, the indicator will be turned off.
Note: Try not to shake the camera while this indicator is blinking.
Viewfinder (back view)
When taking snapshots with the camera disconnected, use this to verify that the desired object of your snapshot is in view.
Figure
Installing WebCam Go