802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G To select the configuration mode, do either of the following:
• Click Setup Wizard if you wish to configure the access point using the
wizard. Refer to “Using Setup Wizard Configuration Mode” below for
detailed information.
• Click Custom Settings if you wish to customize the settings of the access
point. Refer to “Using Custom Settings Configuration Mode” on page 16
for detailed information.
Using Setup Wizard Configuration Mode Setup Wizard configuration mode provides automated access to the screens
necessary to set any of the following configuration profiles:
• 802.11b/g: Provides wireless access to all Crestron Wi-Fi touchpanels,
such as the TPMC-4X, TPMC-4XG, TPMC-8, and TPMC-10. The
802.11b/g configuration profile also provides wireless access to third-party
wireless devices.
• 802.11a: Provides wireless access to 802.11a-enabled Crestron Wi-Fi
touchpanels such as the TPMC-8X.
NOTE: The 802.11a configuration profile provides better reliability than
802.11b/g but slightly less range. If your installation has many wireless
networks nearby or has sources of interference such as microwaves or 2.4
GHz cordless phones, 802.11a may provide a more robust solution than
802.11b/g.
• High Security TPMC-8X: Provides an extremely high level of network
and physical security for corporate environments. Because of the required
security features, this configuration profile provides wireless access to the
TPMC-8X only.
• Standalone Network: Applicable only when the Crestron network is not
connected to an Ethernet network. This configuration profile enables the
access point to function as a DHCP server and provide IP addresses to
Ethernet equipment.
To access Setup Wizard configuration mode, open the Home page and click Setup
Wizard. The “Select Configuration” page opens.
14 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B