Crestron electronic CEN-WAP-ABG-1G - page 19

Crestron CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point
“Select Configuration” Page (802.11b/g Configuration Profile Shown)
To use the wizard:
1. On the “Select Configuration” page, select a configuration profile
(802.11b/g, 802.11a, High Security TPMC-8X, or Standalone Network).
For detailed information about each of the configuration profiles, read the
information provided in the setup wizard for each profile.
2. Click Next. The “Network Setting” page opens, displaying the network
name, which is also referred to as the SSID (service set identifier) of the
access point.
“Network Setting” Page
3. In the Select Passkey text box, enter a network key.
NOTE: The network key is case sensitive. Permissible characters are 0 to
9, a to f, and A to F. If the configuration profile is 802.11b/g, 802.11a, or
Standalone Network, the network key must consist of 10 characters
exactly. If the configuration profile is High Security TPMC-8x, the
network key must consist of a minimum of 8 characters.
Operations & Installation Guide – DOC. 6695B 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G • 15