Crestron electronic CEN-WAP-ABG-1G - page 26

802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
Static DHCP Mappings configuration: The following shows the Static DHCP
Mappings section of the “DHCP Server” page.
“DHCP Server” Page – Static DHCP Mappings
The Static DHCP Mappings section allows you to assign static IP addresses to
DHCP client devices. As a result, a client device is always assigned the same IP
address by the access point. Static DHCP mappings provide the advantage of a static
IP setup and allow configuration of IP addresses from a single point.
To assign a static IP address to a client device:
1. Click the Enabled checkbox. (To disable the mapping, click the checkbox
again to remove the checkmark.)
2. In the Desc. column, enter a description for the mapping.
3. In the MAC address column, enter the MAC address of the client device in
the format xx-xx-xx-xx-xx-xx.
4. In the IP Address column, enter the IP address to be assigned to the client
device.
Examples of static DHCP mappings follow.
22 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B