802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
Security mode: Displays the security mode of the access point: Static WEP,
Enterprise WEP, WPA-PSK with TKIP, WPA-PSK with AES, WPA2-PSK
with TKIP, WPA2-PSK with AES, Enterprise WPA with AES, Enterprise WPA
with TKIP, Enterprise WPA2 with AES, or Enterprise WPA2 with TKIP.
If security mode is disabled, the setting is displayed as Open System.
SSID broadcasts: Displays whether SSID broadcasting is enabled or disabled.
Wireless MAC Filter: Displays whether MAC address filtering is enabled or
disabled.
DHCP Server Settings: The DHCP Server Settings section of the “Bridge/AP
Settings and Info” page displays whether DHCP functionality is disabled or enabled.
The following shows the DHCP Server Settings section of the page when DHCP
functionality is enabled.
“Bridge/AP Settings and Info” Page – DHCP Server Settings
Default gateway: Displays the IP address of the access point, which functions as the
default gateway.
Subnet mask: Displays the subnet mask of the network.
Primary DNS server: Displays the IP address of the primary DNS server.
Secondary DNS server: Displays the IP address of the secondary DNS server.
First allocatable IP address: Displays the first IP address to be assigned to a client
device by the access point.
Allocatable IP address count: Displays the maximum number of devices to which
the access point can assign IP addresses, that is, the maximum number of DHCP
users.
Static DHCP Mappings: The Static DHCP Mappings section of the “Bridge/AP
Settings and Info” page displays the static DHCP mapping(s) that are enabled.
Advanced Settings: The following shows the Advanced Settings section of the
“Bridge/AP Settings and Info” page.
“Bridge/AP Settings and Info” Page – Advanced Settings
SNMP: Displays whether SNMP is enabled or disabled.
UPNP: Displays whether UPnP is enabled or disabled.
40 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B