Crestron CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point
Please select a file to restore: In the text box, enter the path to the filename
containing previous configuration settings by clicking Browse and selecting the
configuration file from your computer’s hard drive.
Click Restore to start the configuration restore process. The access point reboots
automatically when the configuration restore process is complete.
Backing Up Current
Configuration Settings
You can back up the file containing current configuration settings of the access point
to your computer’s hard drive. The default configuration filename is config.bin.
To back up current configuration settings, click the ADMINISTRATION tab and then
click the FIRMWARE subtab. The “Firmware Tools” page opens.
“Firmware Tools” Page – Backup Configuration
Back up the current configuration as follows:
1. Click Back Up to open the “File Download” window.
2. Click Save to open the “Save As” window.
3. Navigate to the location on your hard drive to which you want to save the
configuration file.
4. (Optional) In the File name text box, enter a new file name if desired.
5. Click Save to open the “Download Complete” window and save the file.
6. When the download is complete, click Close.
You can then load the configuration file to any CEN-WAP-ABG-1G access point by
performing the configuration restore process discussed in “Restoring Previous
Configuration Settings” on page 34.
Restoring Factory Default
Settings
To restore factory default configuration settings of the access point, click the
ADMINISTRATION tab and then click the FIRMWARE subtab. The “Firmware
Tools” page opens.
“Firmware Tools” Page – Restore Factory Defaults
Click Reset to restore factory default settings.
NOTE: The access point restarts to allow the factory default settings to take effect.
After 15-20 seconds, the “Bridge/AP Settings and Info” page opens to allow you to
review the settings.
Operations & Installation Guide – DOC. 6695B 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G • 35