Crestron CEN-WAP-ABG-1G 802.11a/b/g Wireless Access Point
Model: Displays the model number of the access point: CEN-WAP-ABG-1G.
BIOS/Firmware version: Displays the BIOS (Basic Input/Output System) and
firmware versions.
Operational Mode: Displays the basic operational mode: WiFi Access Point or
WiFi Bridge.
MAC address: Displays the MAC address of the access point.
System up time (hr:min:sec): Displays the amount of time in hours, minutes, and
seconds that the access point has been powered on.
TCP/IP Settings: The following shows the TCP/IP Settings section of the
“Bridge/AP Settings and Info” page.
“Bridge/AP Settings and Info” Page – TCP/IP Settings
IP address: Displays the IP address of the access point.
Subnet mask: Displays the subnet mask of the network.
Default gateway: Displays the IP address of the default gateway.
Wireless Settings: The following shows the Wireless Settings section of the
“Bridge/AP Settings and Info” page.
“Bridge/AP Settings and Info” Page – Wireless Settings
Wireless Network Mode: Displays the wireless network mode of the access point:
11B Only, 11G Only, 11B/G Mixed, or 11A.
Channel number: Displays the RF channel: auto or a value from 1 (2.412 GHz) to
11 (2.462 GHz).
Network name (SSID): Displays the network name, also referred to as the SSID
(service set identifier), of the access point.
Data rate: Displays the rate of data transmission: auto or a value from 1 Mbps to
54 Mbps.
Operations & Installation Guide – DOC. 6695B 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G 39