802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
NOTE: The user name and password are not case sensitive.
Old password: Enter the old password.
New user name: Enter a new user name.
New password: Enter a new password.
Re-enter to confirm: Reenter the new password for confirmation of the password.
Upgrading Firmware NOTE: Upgrading the firmware of the access point may cause a loss of the current
configuration settings; therefore, be sure to back up the current configuration
settings before upgrading the firmware. For information about backing up
configuration settings, refer to “Backing Up Current Configuration Settings” on
page 35.
To upgrade firmware of the access point, click the ADMINISTRATION tab and then
click the FIRMWARE subtab. The “Firmware Tools” page opens.
“Firmware Tools” Page – Firmware Upgrade
Refer to the configuration guidelines that fo llow.
Please select a file to upgrade: In the text box, enter the path to the filename
containing the new firmware by clicking Browse and selecting the firmware file
from the Crestron website.
NOTE: Before upgrading the firmware, be sure to read the release notes.
Click Upgrade to start the firmware upgrade process. The access point reboots
automatically when the upgrade is complete.
Restoring Previous
Configuration Settings
If necessary, you can restore previous access point configuration settings from your
computer’s hard drive.
To restore previous configuration settings, click the ADMINISTRATION tab and then
click the FIRMWARE subtab. The “Firmware Tools” page opens.
“Firmware Tools” Page – Restore Configuration
Refer to the configuration guidelines that fo llow.
34 • 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B