802.11a/b/g Wireless Access Point Crestron CEN-WAP-ABG-1G
“DHCP Server” Page (DHCP Disabled)
Refer to the configuration guidelines that fo llow.
Functionality: From the drop-down list, select either of the following:
Disable: (Default setting) Prevents the access point from functioning as a
DHCP server. Select Disable if you do not want a DHCP server or if you
already have a DHCP server (such as a router) on your network.
Enable: Allows the access point to function as a DHCP server. Select
Enable if your network has a switch instead of a router.
NOTE: Only one DHCP server can exist on your network. Multiple DHCP
servers on the same network cause network issues.
If you have enabled the access point to function as a DHCP server, configure DHCP
server settings as follows.
Basic DHCP server configuration: The following shows the Basic section of the
“DHCP Server” page when DHCP server functionality is enabled in the
Functionality drop-down list.
20 802.11a/b/g Wireless Access Point: CEN-WAP-ABG-1G Operations & Installation Guide – DOC. 6695B