Crestron electronic CP-X8150 Crestron e-Control, Clicking the corresponding tab at the top right

3. Web Control

3.2 Crestron e-Control®

Tab

The Main window as shown above is
displayed at first. However, if you have
enabled User Password on the Tools window
(&46), a dialog prompting you to enter
the password as shown on the right will be
displayed, and no operation is enabled until
you have entered the password. After entering
the preset password, the dialog disappears
and the Main window will be displayed.
As shown below, you can open a window by		User Password dialog
clicking the corresponding tab at the top right
of the window.
Tab	Description
Logout	Logs out from e-Control®.
	This tab appears only when User Password of the Tools window is
	enabled.
Tools	Opens Tools window (&45).
Info	Opens Info window (&47).
Contact IT Help	Opens Help Desk window (&48).

NOTE • If Crestron e-Control in the Network Settings (&21) is set to Disable, Crestron e-Control®cannot be used to operate the projector. Enable Crestron e-Control and close the web browser. Next, restart the web browser, followed by entering the projector's IP address.

•Only English is supported on Crestron e-Control®.

•If the connection is terminated, the "Loading..." screen will appear. Check the connection between the projector and the computer, then return or refresh the Web page.

42