3. Web Control
3.1 Projector Web Control - Port Settings (continued)
| Item | Description |
|
| |
SNMP Port | Configures the SNMP port. | |
| Port open | Click the [Enable] check box to use SNMP. |
|
| Configures the destination of the SNMP Trap in IP format. |
|
| • The address allows not only IP address but also domain |
| Trap address | name if the valid DNS server is setup in the Network |
|
| Settings. The maximum length of host or domain name is up |
|
| to 255 characters. |
| Download MIB file | Downloads a MIB file from the projector. |
Network Bridge Port | Configures the Bridge port number. | |
|
| Input the port number. |
| Port number | Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352 |
| between 1024 and 65535 can be set up. It is set to 9717 as | |
|
| |
|
| the default setting. |
Click the [Apply] button to save the settings.
NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection from Network Restart on the main menu(&41).
23
