1. Connection to the network
1.Connection to the network
1.1System requirements
1.1.1 Required equipment preparation
The following equipments are required to connect the projector to your computer through the network.
■ Common The projector: 1 unit, Computer : minimum 1 set
■ Depending on how you want to connect 1) For the wired connection *1
LAN cable
2)For the wireless connection *2
- Projector side
IEEE802.11b/g/n USB wireless adapter (option :
IEEE802.11 b/g/n wireless LAN equipment: 1 unit for each *3
*1: The system for using the network function of the projector requires communication environment conforming
*2: An access point is required when the wireless LAN connection is used as Infrastructure mode.
*3: Depending on the type of wireless network device and computer you are using,
the projector may not be able to communicate properly with your computer, even if the computer is equipped with a
To eliminate communication problems, please use a
1.1.2 Hardware and software requirement for computer
To connect your computer to the projector and use the network function of the projector, your computer needs to meet the following requirements.
üOS: One of the following.
Windows ® XP Home Edition /Professional Edition (32 bit version only) Windows Vista ® Home Basic /Home Premium /Business /Ultimate /Enterprise
(32 bit version only)
Windows ® 7 Starter /Home Basic /Home Premium /Professional /Ultimate /
Enterprise (32 bit version only)
üCPU: Pentium 4 (2.8 GHz or higher)
üGraphic card: 16 bit, XGA or higher
* When using the “LiveViewer” it is recommended that the display resolution of your computer is set to 1024 x 768.
üMemory: 512 MB or higher
üHard disk space: 100 MB or higher
üWeb browser: Internet Explorer ® 6.0 or higher
üCD-ROM/DVD-ROM drive
5
