7. Other Functions
7.4 Command Control via the Network (continued)
When the authentication setting is enabled, the following settings are required. (&32)
7)Click the [Security Settings] on the main menu.
8)Click the [Network Control] and enter the desired authentication password.
* See NOTE.
9)Click the [Apply] button to save the settings.
NOTE • The Authentication Password will be the same for Network Control Port1 (Port: 23), Network Control Port2 (Port: 9715), PJLink™ Port (Port: 4352), My Image Port (Port: 9716) and Messenger Port (Port: 9719).
•The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection from Network Restart on the main menu(&41).
63
