7. Other Functions
7.3Event Scheduling(continued)
Date/Time Settings (&30)
The Date/Time setting can be adjusted via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1)Enter “http://192.168.1.10/” into the address bar of the web browser, and select
Projector Web Control from the selection window.
2)Enter your user name and password, and then click the [OK].
3)Click the [Date/Time Settings] on the main menu and configure each item. Refer to item 3.1.8 Date/Time Settings (&30) for further information.
4)Click the [Apply] button to save the settings.
NOTE • The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time (&31).
•Once you turn off the projector in the SAVING mode (&SETUP menu in the Operating Guide) or the AC power, the current date and time setting is reset.
61
