Crestron MPS-250 Multimedia Presentation System 250
MPS-250 Specifications (Continued)
SPECIFICATION DETAILS
Video/RGB
Switcher
Signal Types
Video/HDTV Formats
RGB Formats
Maximum Resolution
Blanking Time
Sync Rise/Fall Time
Sync Latency
Gain
QM Cable Compensation
6x5 crosspoint matrix including 1x1 QM
signal routing, local QM delay skew
compensation
RGB and composite, S-video, or component
video (does not transcode)
NTSC or PAL, HDTV up to 1080i/1080p
RGBHV or RGBS
QXGA 2048 x 1536 @ 60Hz
(WUXGA 1920 x 1200 @ 60Hz via QM)
< 0.1 second
3.5 ns maximum
< 30 ns
0dB (75 ohms terminated)
10-bit digitally controlled PEAK (bandwidth)
and BOOST (gain); 4-bit digitally controlled
SKEW delay, 0 to 22 ns (independent for
R, G, and B)
Audio
Switcher/Preamp
A-D/D-A Conversion
Output Volume Range
Mixer Volume Range
Mute
Input Compensation
Mic Input Gain
Gate Level (Threshold)
Gate Attack Time
Gate Decay (Release) Time
Gating Depth
Compressor Curve
Compressor Threshold Level
Compressor Attack Time
Compressor Release Time
Compression Ratio
6x2 stereo crosspoint matrix including 1x1
QM signal routing, 2-channel gated mic
preamp with compressor & limiter,
4-channels mic EQ, 6X5 mic/program matrix
mixer, 4x2 mic matrix mixer on the QM
output, stereo volume/tone control and EQ
per each of PROGRAM and RECORD
outputs, mono volume/tone control and
EQ/delay on SPEECH output, integrated
power amplifier, QM auto-compensation with
self-peaking
24-bit, 48 kHz
-80dB to +20dB, 0.1dB steps
-80dB to 0dB, 0.1dB steps
-100dB (electronic), -120dB (relay)
±10dB, 0.1dB steps
0 to 100% (40dB range) plus mute
0 to 100%
0 to 100 ms
0 to 5000 ms
-80dB (mute) to 0dB, 0.1dB steps
Selectable hard or soft knee
-80dB to +20dB, 0.1dB steps
0.1 to 300 ms
1 to 500 ms
1:1 (no compression) to
10:1 (maximum compression)
(Continued on following page)
Operations Guide – DOC. 6647A Multimedia Presentation System 250: MPS-250 • 7