Crestron MPS-250 Multimedia Presentation System 250
⇒ ON: The compression function for the selected microphone input is
enabled.
• To exit the Microphone Compression control without saving changes, press
MENU.
Switch Microphone Limiter A microphone limiter can be individually set on each microphone input. To switch
the microphone limiter on or off:
• Access the Microphone menu as described on page 53.
• Press the k or j buttons until “Mic 1 Limiter” or “Mic 2 Limiter” is
displayed on the LCD and press ENTER to open the Microphone Limiter
control.
Microphone Limiter Control (MIC 1 shown)
Mic 1 Limiter
OFF
• Press the k or j buttons until the desired setting is displayed on the LCD
and press ENTER to save the setting. The current setting is indicated with
an asterisk (*). The following settings are available:
⇒ OFF: The limiter function for the selected microphone input is
disabled.
⇒ ON: The limiter function for the selected microphone input is enabled.
• To exit the Microphone Limiter control without saving changes, press
MENU.
Switch Phantom Power Phantom power for the microphone inputs can be switched on or off. To switch
phantom power on or off:
• Access the Microphone menu as described on page 53.
• Press the k or j buttons until “Phantom Power” is displayed on the LCD
and press ENTER to open the Phantom Power control.
Phantom Power Control
Phantom Power
Off
Operations Guide – DOC. 6647A Multimedia Presentation System 250: MPS-250 • 55