Crestron electronic MPS-250 Restore Defaults Aud. settings only, Reset all audio? No

Crestron MPS-250 Multimedia Presentation System 250
Restore Default Settings The MPS-250 can be restored to its default factory settings from the front panel.
Users can select to restore the audio settings or to restore the audio settings, source
names, output names, and function names.
• To restore audio settings only:
⇒ Access the Control Setup menu as described on page 65.
⇒ Press the k or j buttons until “Defaults” is displayed on the LCD and
press ENTER to display the Restore Defaults menu.
Restore Defaults Menu-Audio Settings Only
Restore Defaults
Aud. settings only
⇒ Press the k or j buttons until “Aud. settings only” is displayed on the
LCD and press ENTER.
Confirm Restore Audio Default Settings Only
Reset all audio?
No
⇒ Press the k or j buttons until “Yes” is displayed on the LCD and
press ENTER to restore the audio settings to the factory defaults. To
cancel, press the k or j buttons until “No” is displayed on the LCD
and press ENTER.
• To restore all factory default settings:
⇒ Access the Control Setup menu as described on page 65.
⇒ Press the k or j buttons until “Defaults” is displayed on the LCD and
press ENTER to display the Restore Defaults menu.
Operations Guide – DOC. 6647A Multimedia Presentation System 250: MPS-250 • 73