Crestron electronic MPS-250 Rec. Fixed/Variable Fixed

Crestron MPS-250 Multimedia Presentation System 250
Fixed/Variable Control
Rec. Fixed/Variable
Fixed
• Press the k or j buttons until the desired setting is displayed on the LCD.
The current setting is indicated with an asterisk (*). The following settings
are available:
⇒ Fixed: The RECORD output operates at a fixed level.
⇒ Variable: The RECORD output operates at a variable level.
• Press ENTER to save changes and return to the previous screen. To cancel
without saving changes, press MENU.
Adjust the Record Startup
Volume The Record Startup Volume control is used to establish the RECORD output’s
volume level setting when an input is selected. The SPEECH and PROGRAM
outputs are not affected by changes made to the Record Startup Volume level.
NOTE: The Record Volume can only be used if the Fixed/Variable Mode is set to
“Variable”. For more information, refer to “Set Fixed/Variable Mode” on page 50.
To adjust the Record Startup Volume level:
• Access the Record Output menu as described on page 49.
• Press the k or j buttons until “Startup Vol.” is displayed on the LCD and
press ENTER to open the Record Startup Volume control.
Record Startup Volume Control
Rec. Startup Vol.
30%
• Adjust the Record Startup Volume level with the j and k buttons. Press
the k button to increase the Record Startup Volume level. Press the j
button to lower the Record Startup Volume level. The highest Record
Startup Volume setting is 100%.
NOTE: While adjusting the Record Startup Volume level, the Record
Volume level can be adjusted by turning the volume control clockwise to
raise the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
Operations Guide – DOC. 6647A Multimedia Presentation System 250: MPS-250 • 51