Crestron electronic MPS-250 Speech Source Mix Aud. Only, Speech Bass 0db

Multimedia Presentation System 250 Crestron MPS-250
Speech Source Mix Controls
Speech Source Mix
Aud. Only
• Press the k or j buttons until the desired setting is displayed on the LCD.
The current setting is indicated with an asterisk (*). The following settings
are available:
⇒ Aud. Only: Sends the audio signal from the selected source to the
SPEECH output.
⇒ Mic. Only: Sends the microphone input signals to the SPEECH
output.
⇒ Mic + Aud: Sends a mix of the audio signal from the selected source
and the microphone input signals to the SPEECH output.
NOTE: While setting the Speech Source Mix, the Speech Volume
level can be adjusted by turning the volume control clockwise to raise
the volume, or counterclockwise to lower the volume. When adjusting
the volume, the display will change to indicate the volume level.
• Press ENTER to save changes and return to the previous screen. To cancel
without saving changes, press MENU.
Set the Speech Bass Level To set the Speech Bass level:
• Access the Speech Output menu as described on page 43.
• Press the k or j buttons until “Bass” is displayed on the LCD and press
ENTER to open the Speech Bass controls. The current bass level will be
displayed.
Speech Bass Controls
Speech Bass
0db
• Adjust the Speech Bass level with the j and k buttons. Press the k button
to increase the Speech Bass level. Press the j button to lower the Speech
Bass level.
44 • Multimedia Presentation System 250: MPS-250 Operations Guide – DOC. 6647A