![](/images/new-backgrounds/1061811/618117x1.webp)
assembly instructions
Assembling the Compact Juice Extractor
1.Place motor base on a clean, flat surface. Make sure the motor base is unplugged from the power outlet (not shown).
2.Be sure the safety bar is in the unlock position. (It is unlocked if it is at rest at rear of motor base.)
3.Place filter housing on top of motor base by lining up the grooves in the filter housing with the arms on motor base.
4.Insert the mesh filter basket/ blade firmly into filter housing by pressing down on rim of the filter so it locks securely in place. Be careful not to touch the blades in the bottom of the basket and be sure this part is inserted before every use.
5.Place cover on top of filter housing. Be sure to align the feed tube over the mesh filter.
6.Move the safety bar into the lock position by bringing the bar over the cover until it sits securely in the grooves.
7.Insert the pulp container into the rear of the unit by tilting the opening slightly under the cover.
8.Place juice pitcher in the front center of the unit.
9.Insert the food pusher into the feed tube by aligning the groove in the food pusher with the small indent on the inside of feed tube.
10.Make sure the flow spout is in the open position. Never juice with the spout in the closed position.
1.
3.
5.
7.
9.
2.
4.
6.
8.
10.
4