D-Link DVG-2032S user manual Line Settings, Codec

Enable Out-of-Band DTMF: To send DTMF keys (0~9, *, #,) follow the RFC2833 rules or via SIP Info.

Enable Hook Flash Event: The gateway will deliver the flash signal to remote party via RFC2833 or SIP Info.

Payload Type：Payload type of RFC2833.

Uses Second CPT for VoIP Call: This function is usually applied when the user selects VoIP as the primary path for outgoing calls and PSTN as the backup. By enabling this function, the gateway will generate a different set of tones to inform the user that VoIP is in service. Should VoIP fails and fallback to PSTN, the user will hear PSTN tones instead of the second set CPT. (for CPT related settings, please refer to Trunk Management -> CPT Settings)

Line Settings

Listening Volume: Adjusts the hearing volume.

Speaking Volume: Adjusts the speaking volume.

Tone Volume: Adds a new option to make tone volume adjustable. This setting will be applied to all tones generated by the gateway including Dial Tone, Busy Tone, and so on.

Flash Time: Used to adjust the detecting period of flash signal from the phone set connected to the FXS port. For example, if pressing the HOLD key will disconnect a call, increase the “Flash Detect Time” should fix this issue.

Enable Polarity Reversal: As the remote site answer this call or hook on the FXS port will reverse the polarity.

Codec

Preferred Codec Type: Since different voice codec have different compression ratios, so