Network Settings LAN, LAN interface mode※ | D-Link DVG-2032S

19

Network Settings (LAN)

LAN interface mode※

Router: The system serves as a router with NAT.

Bridge: The system serves as a bridge between WAN port and LAN port without NAT. (LAN default gateway will still be accessible for configuration).

LAN IP/Subnet mask

Gateway LAN Port IP address and the subnet mask value.

Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port must be used. WAN Port cannot make this setting. Always use port 80 when connecting to LAN port. 0 is to disable http port for WAN.

Enable Web UI: It disables any access from WAN and LAN if ticked.

Enable Telnet Service: It allows user to make settings from Telnet.

Image 23

D-Link DVG-2032S user manual Network Settings LAN, LAN interface mode※, LAN IP/Subnet mask

Contents

DVG-2032S Voip Gateway Page Contents Coding Principle Product Overview Introduction Call features optional Product Features Rear Panel Hardware DescriptionFront Panel Gateway Assigned with a Public IP Address Network Interface Gateway in a NAT network Integrating the DVG-2032S with PBX DVG-2032S connecting directly to phone setsTelephone Interface Description Example for DVG-2032S Preparation Basic Settings of a GatewayIVR Interactive Voice Response To inquire about current Gateway’s WAN Port IP address Save SettingsInstructions Function Code Description Example IVR Functions Table Function Code Description Example Default Gateway Settings Static IP Settings Function Command Select a Static IPIP address Settings Subnet Mask Settings PPPoE Account Settings PPPoE Character Conversion Table Instructions Network Settings WANPage Adsl PPPoE Settings IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Setting Static IP Clone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ WAN QoS QoS Settings NAT Traversal NAT/DDNS Ddns Telephony Settings Hotline Functions SIP 164 System Each line registers to Proxy independently FXS Representative number registers to Proxy Calling Features Calling Feature Instructions Advanced Options Codec Line Settings Fax Settings Drop Silent Call Timeout Set the time to hang up the phone Speed Dial Digit MapPhone Book ACL for Management Caller Filter Language CDR SettingsCPT/Cadence Settings System Information Ping Test RTP Packet SummaryStun Inquiry Snmp Backup/Restore System Operations Save Settings Provision Settings Logout Software Upgrade IP Sharing Functions Select TCP/IP, and then click Properties Page Dialed Number Processing Flow Instruction End