Select TCP/IP, and then click Properties | D-Link DVG-2032S specs

The IP settings on PC are as follows (using Windows 2000 for example) Open Start->Settings->Control Panel

Open Network and Dial-up Connection

Open Local Area Connection

Click Properties

Select TCP/IP, and then click Properties.

Image 48

D-Link DVG-2032S user manual Select TCP/IP, and then click Properties

Contents

DVG-2032S Voip Gateway Page Contents Coding Principle Introduction Product Overview Product Features Call features optional Hardware Description Front PanelRear Panel Network Interface Gateway Assigned with a Public IP Address Gateway in a NAT network DVG-2032S connecting directly to phone sets Telephone Interface DescriptionExample for DVG-2032S Integrating the DVG-2032S with PBX Basic Settings of a Gateway IVR Interactive Voice ResponsePreparation Save Settings InstructionsTo inquire about current Gateway’s WAN Port IP address IVR Functions Table Function Code Description Example Function Code Description Example Static IP Settings Function Command Select a Static IP IP address SettingsSubnet Mask Settings Default Gateway Settings PPPoE Account Settings PPPoE Character Conversion Table Network Settings WAN InstructionsPage IP Configuration Setting WAN Port Setting Dynamic IP DhcpSetting Static IP Adsl PPPoE Settings DNS Settings BigPond for Australia use onlyClone MAC Using Phone Books Manager Network Settings LAN LAN interface mode※LAN IP/Subnet mask QoS Settings WAN QoS NAT/DDNS NAT Traversal Ddns Telephony Settings Hotline Functions SIP 164 System FXS Representative number registers to Proxy Each line registers to Proxy independently Calling Features Calling Feature Instructions Advanced Options Line Settings Codec Fax Settings Drop Silent Call Timeout Set the time to hang up the phone Digit Map Phone BookSpeed Dial Caller Filter ACL for Management CDR Settings CPT/Cadence SettingsLanguage System Information RTP Packet Summary Stun InquiryPing Test Backup/Restore Snmp Provision Settings System Operations Save Settings Software Upgrade Logout IP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing Flow End